Hey guys,
I drew up this schematic for how I plan to power my small layout with a KW, using one of those terminal strips to distribute my power. I will be using lionchief Plus, so Ill need 18V track power on the A terminal, and 12-14V on the B terminal to power six supernap switches and three uncoupling sections.
Click Here to see my layout progress thread.
I've been working on wiring prep work like cutting stripping and crimping. Im using spade and the eyelets crimp connectors, and what I did was screw a bunch of the eyelet connectors together with a machine screw, one for each switch and then i will run one to my Terminal strip. Anyone see anything wrong with that. I managed to find Red(hot), white(common), and Blue(Switch/Acc) 14GA wire at my local hardware store, I realize this is probably overkill but oh well. I did get my TVS diodes and 5A(track) and 1A(accessory) circuit breakers in the mail today, so I'm primed to get started.
Please let me know if all my hours of research (forum lurking) have paid off and I'm on the right track.
