Hi, I just bought a Railking challenger from 1996 and it’s running well but I have a question about the smoke unit. It has a double smokestack and seems have gotten a bit saturated the first time I used it. Also is one of the stacks, the front or rear or both where I add the smoke fluid? I added it to both and it didn’t perform well. The instructions didn’t say. This is the first articulated engine I’ve been able to acquire so any help is greatly appreciated!
Replies sorted oldest to newest
There’s only one smoke unit even though it has two stacks. There’s a shared funnel between the two stacks that leads to a single smoke unit. So more than likely you’ve flooded it. Also, did you try blowing down the stacks with your mouth to remove any fluid bubbles? …if you feel like you’ve possibly flooded it, you can turn the engine upside down and place some paper towels under the stacks, and leave it sit that way for a while.
Pat
If you're feeling airflow out the stack, try just running it for 15-20 minutes, you'll likely see it cook off enough fluid to start smoking again.
Access to this requires an OGR Forum Supporting Membership
