Ross Switch w/DZ1000 & Atlas 6931 Dwarf Signal

Since Z-Stuff uses the Atlas signal system for their signals, I would think the Atlas signals would somehow be compatible unless Z-stuff has the dwarf signals already. Maybe try emailing Z-stuff?

Thanks rtr12, email sent!

You are welcome, hope it helps you with the required info. I am somewhat familiar with Atlas, but not at all with Z-stuff. Please post your findings when you get a reply.

Edit: I'm terribly sorry, I may have sent you on a wild goose chase here. After this post it just came to me that it was Custom Signals, not Z-Stuff that uses the Atlas signal system. Don't know what I was (or wasn't) thinking when I replied earlier. Old brain gets locked up every now and then. I'm hoping they may still give you some helpful info though. Again, I apologize for the mis-information.

Southernrr,

Look on the Atlas website for 6931 install instructions. You may have to compare those with DZ-1000 install instructions for compatibility.

Chuck

They are not compatible without modification.  The Atlas switch machine uses resistance to change the signal  from red to green.  In order to make them work you need to install a resister with the signal.  I'll see if I can find the drawing I used to do it.

Thanks NYC 428, a drawing would be very helpful!

Response from Dennis Zander at Z-Stuff for Trains:

Thanks Jeff...     I was hoping someone here had tried and better yet, it all worked!!