Skip to main content

3 replies

Ross Switch w/Z2500 & Control Panel

D Don(Cerritos)OGR Forum Member

I have been asked to make a Control Panel using the Z2500 switch motors.  The idea is a Control Panel using a drawing of the track plan, and using toggle switches and LED's on each of the track legs.  With the LED glowing green to show the direction of the switch, then change color to red when the switch is reversed.  My primary concern is whether or not the 2500 motor will operate without the push buttons.  Also intending to wire into a Lionel SC2 OR DCS and the AIU's.  Anyone aware of any problems using SPDT switches and the LED's?

 

Thanks for any replies!

Original Post

Replies sorted oldest to newest

John DeAltoJohn DeAltoOGR Forum Member

Hi,

 

I wouldn't use the sigale pole switches The switch machine are not designed that way.

Hi,

 

I wouldn't use the single pole switches The switch machine are not designed that way.

 

It looks like you want to lights on a control panel there is a way to do that.

Just run wire form your switch machine to your control panel. 

 

Good luck, John   

cjackcjackOGR Forum Member DIGITAL SUBSCRIBER
Originally Posted by Don(Cerritos):

I have been asked to make a Control Panel using the Z2500 switch motors.  The idea is a Control Panel using a drawing of the track plan, and using toggle switches and LED's on each of the track legs.  With the LED glowing green to show the direction of the switch, then change color to red when the switch is reversed.  My primary concern is whether or not the 2500 motor will operate without the push buttons.  Also intending to wire into a Lionel SC2 OR DCS and the AIU's.  Anyone aware of any problems using SPDT switches and the LED's?

 

Thanks for any replies!

Doesn't this show it? Control the LEDs with the relay.

http://www.z-stuff.net/app30.html

CAPPilotCAPPilotOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

The DZ-2502 switch controller uses a single wire for control of the small computer in the DZ-2500 Switch machine.  The DZ-2500 can be reprogrammed to use two wires for use with an AIU on DCS layouts and with a toggle switch.  I believe you can use an SC2 also in this mode.  I also believe you lose the TMCC capability inherent in the machine when you do this.

Add Reply

Views: 244
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×