Skip to main content

I got an SC-2 thinking I could use it with a CAB-1 to control uncoupler tracks using the momentary function of the SC-2.  But I've discovered the momentary function seems to have a minimum time interval of about 1 second, which is too long to have the uncoupler on for a moving train, or to trigger some operating car feature which uses the uncoupler.  With my separate uncoupler control button, I can control the uncoupler duration much better.

 

Is the SC-2 the wrong approach, or is there a way to change the duration of the SC-2 momentary function?  Or is there some other TMCC control approach I should look at for uncouplers?

 

Any ideas are appreciated.

 

Original Post

Replies sorted oldest to newest

 

http://www.lionel.com/Products...neID=&CatalogId=

 

 

  • FEATURES:
  • Operates Remote-Control and Uncoupling Track sections from the CAB Remote Controller
  • Uncouples, unloads, or activates operating rolling stock from the touch of a button on the CAB Remote Controller
  • Is programmable to operate two Remote-Control Track sections OR four Uncoupling Track sections

 

 

Last edited by Drew Madere
Post
×
×
×
×
Link copied to your clipboard.
×
×