My dad and I are going to use tortoise switch machines on atlas 3 rail turnouts via a SC2.
Any suggestions on how we do this?
Original Post
Replies sorted oldest to newest
I would suggest you use an ASC to accomplish this. The Tortoise machine is a stall type device that requires power be applied at all times. The SC-2 will not apply power at all times, only momentarily. The ASC however can be set to apply power all the time.
I will post a link to one of our videos on how to wire a Tortoise machine for TMCC / Legacy control when I get to the office.
Thanks,
Mike
Thanks Mike
Biggs767,
The video on Lionel.com for wiring up the Tortoise Machine can be found here; http://www.lionel.com/Customer....cfm?documentID=6478
The programming for the ASC (to make it work with the Tortoise) can be found here;http://www.lionel.com/Customer....cfm?documentID=6477
This should help clear the fog!
Thanks,
Mike
