Skip to main content

Tore down layout and starting over. This is what I have purchased over the years and how I run my trains: TMCC/Conventional/PS2 via MTH Explorer/Legacy PowerMaster/MRC Pure Power Dual Transformer/Lionel 135 PH/Power Shield PSX-1 circuit protection. All this connected at different times during my layout upgrade and expansion. Now, I'm starting over. Where do I begin? How do I include all the above? Should I include all of the above? Your suggestions would be very helpful.

Layout size: 5 feet wide by 11 feet long, 30 inches high and access on 3 sides only

Last edited by Charlesp34
Original Post

Replies sorted oldest to newest

The link below should give you a starting point. Obviously, the DCS Explorer has certain limitations, whereas going to a full DCS system would allow you to integrate TMCC/Legacy operation.

You should also consider purchasing one of the DCS companion books which provides detailed explanations and diagrams on how to hook everything up.

https://ogrforum.com/...-vs-full-dcs-systems

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×