Sunday Scenic Showcase August 29,2021

I’ve been continuing to work on “Witzinger’s Washboards,” an office/factory background structure model, from a kit by Bar Mills Models, for an expansion at the rear of my 12’-by-8’ layout on a 30-inch by 14-inch piece of extruded pink foam.

“Slate” shingles and a chimney have been added to the office roof. An auxiliary roof above the 1^st floor office windows and three awnings above the 2^nd floor office windows, all with “slate” shingles, have also been added.

A billboard atop the factory and a loading dock with an auxiliary roof at the front of the factory remain to be completed.

The placement of buildings on the expansion will be finalized after all the buildings have been built. A step-by-step set of pictures can be seen at the link listed below.

MELGAR

https://ogrforum.com/...c/156701992669038138

Love the colors.

Our club trestle. Many years ago I ripped all the pine and made the curved section to build the bents.

Alan, is that a detached garage in lower left of the fourth picture?

Mel applying those shingles must have been like "Niagara Falls".  "Slowly I turn, step by step, inch by inch..."

@DMASSO posted:

Our club trestle. Many years ago I ripped all the pine and made the curved section to build the bents.

Wow! is not enough awe.

Coach,

It is. It is connected by an open breezeway that will just have a roof on it. I will be doing all the trim next.

Hello all. Very nice work displayed here as usual.

Here is a Coal Breaker Office I have been wrapping up for my club layout. I just added and painted the shingles. Have yet to attach the front stairs and add some lights for the upstairs office.

The boss has found that the front porch gives a good vantage to watch how much work is getting done.

Just working on a section of the layout and thought I would take a photo of where I am with it so far. Don't you just love the finishing touch of blue masking tape?

Dave

Great stuff, everyone!

Peter