Sunday Scenic Showcase January 4, 2015

Nice Job. You didn't mention your gasholders size, Usually they are quite large and dominated the landscape. Walthers makes an HO kit that is usable in O scale if you remove the HO scale ladders and railings. The telescopic sections can be build in one of three different levels. It is a bit small to be exact O scale but it looks right.

Wood deck decoration...

 

 

 

#876 ebay preview...

 

Wonderful, Alan. I'm always amazed by how quickly you pump this stuff out.

 

great as always, Steve.

I had posted this on another thread.  My wife did some backdrop painting on the layout.  

Great stuff  Guy's……..

Final product, will it be painted black, Alan?

 

Some night shots of my Tire & Battery Service diorama...

  

 

Richard E,

The gas holder is 15 inches in diameter by 18 inches high for scale dimensions of 60 feet in diameter by 72 feet high.

Steve,

I love looking at the work you produce. Great job.

Jon,

When I work on a project that has my attention I do not want to stop until it is complete. My real job usually gets in the way.

Brian,

The tank will be painted silver and there will be a section of the gas holder that will be rust colored.

Steve, Leon and Mike,

Nice work.

 

Alan Graziano

Great work everyone. Was busy with club open house today should contribute next week

Steve

another small shelf scene  The cidermill.  did this on white beaded foam.  The secret to making no mess is use a hot wire for all cuts.  The whole scene is about 30" by 24 "

 

made cuts for the stone wall (resin product from inventory sprayed grey then hutnerline stains). Once outline was made the stone walls were set in fusionfiber tinted grey.  The side building and stand (not shown were added.

 

after drying the remainder was coated with fusionfiber in two batches (one grey and one brown.)

 

For the outlying areas 12 mm static grass was applied to the wet fusionfiber

 

Next I did the outline of the parking area for stand and small road by adding fine cinders (scenic express)

 

 

I then added #50 light ballast over the fine dark cinders and used a very fine mist of water to help set the fine ballast and ciinders.

I covered this area with some cardboard and used 6 mm grass for area near buildings, and also went over the 12 mm areas with the 6 mm grass.. finished off the edge with white phlox (bill langford via scenic express). Sorry about the darkness of photo.  I 'll have one with good light next week

 

 

 

 

 

 

 

 

 

Wow,  Very nice work this week guys!

 

I have a few new background buildings we are working on introducing.

 

Here are some photos.

 

 

 

 

Great work this week guys, sorry i have nothing to add this week

 

 

Alex

Leon, this is beautiful work.

 

Great photos.

Thanks guys what beautiful work and talents showcased here.