TMCC engine controlled by DCS remote, Engine Not On Track displays when AUX1 + 3 pressed

Played around with the DCS remote. Turns out I can use the REV UP/DOWN rocker to change the revs instead of AUX1 + 3. So I guess this question is moot. 

Lou,

What version of DCS is in the remote and the TIU?

Barry Broskowitz posted:

Lou,

What version of DCS is in the remote and the TIU?

DCS version 6.0 on both the remote and TIU.

Pressing AUX1 +3 displays "Engine Not On Track" but the rpms still go up and the locomotive continues to respond to all TMCC commands. "Engine Not On Track" just displays briefly with the press of AUX1 + 3 and then the remote display goes right back to the normal TMCC screen. 

Lou,

It's possible that DCS 6.1 may allow use of the AUX1 + 3 command. No guarantees, however.

Being that the REV UP/DOWN rocker does the same thing I'll stick with that. All other AUX1 + number keys work without that message.