A couple of forum members have ask me show them how I wire my toggle switches for command and conventional operation. I thought that this thread area would be the best place to put my setup. There are many different ways to do this and this is just what I wanted to do. I have Legacy and DCS but only cut off Legacy with a toggle switch because DCS can be turned off in the remote. I run my layout with toggled area blocks and two main lines each one has its on 180 brick for command and I like the MTH Z4000 handles for conventional mode so I use that transformer only for conventional mode of operation. I hope this will be of some help to those that are interested and remember this is only one way to do it and it can be rewired in many different ways. I have attached the three files showing my connections and this one picture.
