Used my older version of RRTrack to create my new layout plan but am having trouble printing the various layers. I'm getting a blank grid no matter what I try. Can't tell if I've got the scale set improperly or just have the layers set wrong for printing.
Would like to print the benchwork layer where I used filled rectangles to represent my plywood boards and pieces. Would also like to be able to separate print the mainline and yard layers.
Thanks for any advice you can lend.
Replies sorted oldest to newest
Hi
I printed the layout with and without labels. I could not find a setting that allowed me to print specific layers. You may need 5.0.... But I'm struggling as I cant read my 5.0 disks on anything I own. Russ has been reluctant to help me solve that issue. I'm concerned I may need to go to a different program.
Marty
Marty R posted:Hi
I printed the layout with and without labels. I could not find a setting that allowed me to print specific layers. You may need 5.0.... But I'm struggling as I cant read my 5.0 disks on anything I own. Russ has been reluctant to help me solve that issue. I'm concerned I may need to go to a different program.
Marty
Thanks so much! Not sure what's going wrong on mine, can't even print the default print out. I think my scale is set wrong as I'm getting an all white, blank print out. Guessing it's honed in on the center where there's no track.
Not quite sure what I'm doing wrong. Can't even print a PDF. Here's a screen shot of the print screen. See how the print preview is a cross-hatched, blank layout despite the layout being in the background? Can't figure it out. Any ideas? I can't even print what your printed.
Go to the website? I’m pretty sure you had to have 5.0 for complete functionality in Win 7. Definitely in Win 10
Meanwhile, if you cut and past the layers to separate files, I can print them alone for you.
Access to this requires an OGR Forum Supporting Membership
