Skip to main content

I am building a 5.5 inch high brick wall for the space between the first and second levels of the layout.  I have installed Masonite to support the brick.  The brick comes from thin, flexible Dept 56 brick sheets.  The sheets are made of PVC resin.  I need a glue that I can spread thin on the Masonite.  I am considering tile mastic although I am not sure that I won't have lumps.  Also I might try double sided carpet tape but PVC might not stick.  I am open to any ideas you might have.  I will be doing 25 linear feet of wall.

Thanks in advance for any suggestions

 

Al

Original Post

Replies sorted oldest to newest

http://www.thistothat.com/

 

Plastic to Paper

If it's OK for the glue to show, we recommend:

<dl><dt>3M 80</dt></dl>

But if you don't want the glue to show use:

<dl><dt>3M 77</dt></dl>

this is their advice I would use polyurethane hot glue and use a  wood roller to flatten the glue.

Product Details
 

Franklin International HiPURformer 1361 Applicator Tool

Product Details
 

HiPURformer™ MP75 Hot Melt Adhesive - 75 Second Set Time

by Steinel
Last edited by AlanRail

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×