Where would you hook up two extra LED's?

Since Evens LED’s are made to use 18v, I would connect the leads to the center rail and outside rail terminals.

@Danr posted:

Since Evens LED’s are made to use 18v, I would connect the leads to the center rail and outside rail terminals.

I should have mentioned that the trolley will be run using a conventional transformer (OP corrected)

Thanks,

John

That won’t matter.  If you touch the pigtails of the Evan’s LED to you transformer you will see that they work  fine.  Most Evan’s LEDs are rated 7-19 volts.  Just make sure that the description doesn’t say otherwise.

@Danr posted:

That won’t matter.  If you touch the pigtails of the Evan’s LED to you transformer you will see that they work  fine.  Most Evan’s LEDs are rated 7-19 volts.  Just make sure that the description doesn’t say otherwise.

I actually tried it and it seems fine.  If anything I may have to coat the 5mm LEDs I already have with some Tamiya Clear Orange to reduce the brightness or order 3mm ones.

Thanks,

John

5mm or 3mm will give you the same brightness.  Since you already have these, the clear orange will mellow out the color to an incandescent look.

Thanks Dan,

It came out great.

John