Skip to main content

Replies sorted oldest to newest

Hubert:

I have talked to some people in the past who say their Legacy systems don't seem to suffer the above signal issues like TMCC does. Don't know if this is certain or not.  It would be interesting if one of the forum members above could try running a TMCC engine through a shaper sheet and see what happens.

The foil in the shaper sheets is most likely aluminum so one can not solder a ground wire to it but maybe some kind of electrically conductive tape?

Joe

Model Structures posted:

Hubert:

I have talked to some people in the past who say their Legacy systems don't seem to suffer the above signal issues like TMCC does. Don't know if this is certain or not.  It would be interesting if one of the forum members above could try running a TMCC engine through a shaper sheet and see what happens

Joe

Interesting. Thought the signal between the system & engines is the same, only the remote/base frequency changed.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×