Z Stuff has not had available the DZ2000 programable switch controller for a long time and is not listed on the site. I had them on my old layout to control by TMCC some of my DZ1000 switch machines. I want to use the DZ2000 I have on the new layout but cannot find the instructions on how to wire or program them. A search of the web has found nothing. Might someone have the instruction sheets available to me? 
Replies sorted oldest to newest
Closest I could find on the DZ website was the DZ2001A Data wire Driver, designed as a plug-in to the a Lionel command base. Contact DZ, Dennis Zander, always seemed very helpful. There are instructions for the DZ2001A, a brief mention of the DZ 2000. IMO, may be the wire colors are the same ???? IMO.
Here you go!
Jeff,
Exactly what I needed. Thanks for taking the time to help me out.
Al
You're welcome!
One note about the DZ-2000: if you're doing any kind of switch position sensing, the white wire of the DZ-2000 outputs only the last commanded state of the DZ-1000; if the switch was thrown manually, or by the auto non-derailing feature, the white signal will not correspond to the actual switch position.
I got around this somehow, but I can't remember off the top of my head how it worked.
Access to this requires an OGR Forum Supporting Membership
