Turned on ZW, green light didn't light, removed shell and switched bulbs, no change, checkedpower and wiring connections and all OK. How do I replace the light socket?
Original Post
Replies sorted oldest to newest
If you have a test meter, have you used it to check continuity within the bulb, and circuit continuity with the bulb removed?
There is a lot more to check out before deciding the problem is a bad socket. It also depends on whether this is a type R version - so far from your description it is probably not.
Does it run trains OK?
Jerry,
Does the ZW operate correctly, like Rob advises, more to look at before thinking the bulb socket is defective. If the ZW is working correctly, 1st look to see if the wiring to the socket is still in good shape, and connected properly.
PCRR/Dave
