Skip to main content

Looking for some help - I have a NYC Legacy Alco S2 switcher that is not responding to sound commands - it runs, has the Diesel engine sounds, but I can't control the volume, activate the bell/horn or tower/crew talk from my Cab-2. Tried to do a reset, and it won't accept the reset - no horn sound when I hit the set button on the Cab-2. Is this possibly a Railsounds board failure?

Original Post

Replies sorted oldest to newest

Sounds come on full-blast as soon as power is applied to the track. Happens whether I address it or not. Once I address it the locomotive moves without issue, just can't control the sounds - only way I was able to control the volume is by the volume control in the cab. I'm going to attempt to open it up later today and see if the board or connection is loose.

Last edited by DaveP

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×