I recently purchased and installed a ATLAS #6999 turntable. The turntable rotates flawlessly, however I am not able to get power to the center rail. I have read through the threads in this forum and did not find a solution.
I am using DCS.Is this a problem ?
Replies sorted oldest to newest
DCS should have nothing to do with it. Have you checked the continuity between the terminals and the rails? Was it new or used? If new, send it back. If used, you could VERY, VERY carefully take off the bridge and check the contacts (the older models had springs and ball bearings).
This is a great and affordable product, hope it works out for you.
Thank you ARTYOUNG, after testing the center rail track lines I did find a break. Fixed it and everything is working great.
Access to this requires an OGR Forum Supporting Membership
