I am in process of adding a point- to- point trolley segment to my layout; this is comprised of 3 points A B C; what I need to find is a relay/switch that will trip the turnout as to direct the trolley : start at A follow to B then switch to C and back to B then on to A, repeating this trek continuously autonomously.
Replies sorted oldest to newest
There are many relay choices available. Tailored suggestions could be offered if you provide more information. For example:
Do you have a relay triggering method in mind? Options could include: insulated rail, infrared or ultrasonic.
What kind of switch machines are on the turnouts you will be using?
Are you wanting to build your own logical control system with discrete components, use a programmable controller (like Arduino), or buy something purpose made?
What are the approximate lengths of each point to point run?
The track runs lengths: A to switch 16 feet +/-: switch to end of B 8 feet +/-: switch to end of C 12 feet +/-: using a Tortoise machine: Plan is to run from A to B : B to C: C back to B: B back to A: so on and so on. Trigger method is the question, what best to use while keeping it basic.
Thanks
I'd suggest checking out Z-Stuff DZ-1075 Sensor with alternate solid state relay 0.9A outputs. I believe they are capable of driving tortoise switch machines. Here's a link to their instructions.
You may also wish to contact Dennis Zander of Z-Stuff to ask about your particular application to see what he recommends. His email can be found on the same website.
Access to this requires an OGR Forum Supporting Membership
