Skip to main content

Greetings!

Here a new one on me. Recently purchased two 2055 motors, both had the same issue - bad field windings. The units would run, but draw too much current and overheat. In the attachment, I’ve circled a damaged winding. I strongly suspect that a screwdriver blade slipped off the brush plate screw and damaged the winding.

Endeavoring to preserve, I drilled out the chassis, rewound the Field, drilled & tapped the frame and reassembled it - decidedly NOT recommended!!! πŸ˜†πŸ˜†πŸ˜†

 

 

Attachments

Images (1)
  • 113D18A7-2214-4881-AE18-8421E141BB5D
Last edited by MitchR
Original Post

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×