Hi, Guys !
Yesterday arrived my Dining Car #1464 with TMCC so I wanted to create a build train with my #3751 + #1464 !
I did each steps and in CAB#2 I received the message " Train Created" but #3751 it not accepted the commands to start !
Is possible to create build trains with TMCC?
Am I make anything of wrong?
* My CAB#2 is in version 1.70 and base 1.60
Thanks,
Replies sorted oldest to newest
Leandro, to build your train be sure that the dining car and the engine are both set to TMCC. Cab2 will not make a properly working build if one is set to legacy. Your 3751 will run fine in TMCC mode you will just lose some of the legacy features. Hope this is helpful.
TMCC Trains can only use TR 1 - 9 - no double digit train numbers will work. Your engines can be double digits but not the train number.
Hope that helps!
@BNSF-Matt posted:TMCC Trains can only use TR 1 - 9 - no double digit train numbers will work. Your engines can be double digits but not the train number.
Hope that helps!
@BNSF-Matt Perfect ! Matte you were spot on!
I was using TR 37 and it not works ! Now is perfect I used TR 1!
@Dennis S Thanks, my #3751 is TMCC !
Thank you !
Access to this requires an OGR Forum Supporting Membership
