Skip to main content

I need two custom conveyor belts for a project; So I have this idea of creating a design of the belt with CorelDraw on paper.

With the width of belt and vertical cleats located; then glue small wood strips located where the cleats  are shown on the paper equally spaced on the flat paper, let dry;

THEN spray the paper and cleats with that rubber spray advertized on TV. let dry;

next cut the belt from the paper. I may need to spray both sides of the paper.

 

I'll let you know if  this works.

 

Original Post

Replies sorted oldest to newest

Justin

 

It's the stuff advertised to seal a rowboat with a screen door bottom. FLEX-SEAL.

 

I have used it on leaking pipes without shutting off the water.

The conveyor belt is both flexible and has added strength to the paper underneath.

 

Although I am using it in a static display it seems like you could use the spray to connect the ends to themselves in forming a strong continuous loop for an animated conveyor.

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×