DAP 120A DF01 Rectifier

Could you post the link to that post with the parts rectifier?

I think your amperage spec is off, 120 amps is huge. Digikey has plenty of DF01 bridge rectifiers

That's why I asked for the link. Might be 12.0A or even 1.20A for some LED ckt.

its a 1.2

DF01 is a 100 volt 1 amp bridge rectifier. Mouser has them as well.

http://www.mouser.com/ProductD...c11fJuJc8ToCIRoYA%3d

Pete

Tons of them, it's a standard footprint regulator.  I buy them in lots of 100 off eBay for peanuts.  eBay: 291615048704

This is an old post that I printed off on 5/8/2014.  I love my note books.  I hate to reinvent the wheel and I have gotten so much good stuff off this site I can't sa how much I appreciate it.  The original post is dated October 2, 2013 by Joe K

https://ogrforum.com/t...r-light-installation

I hope I have spelled every thing correctly

I just saw that post has been deleted.

The parts list follows

5mm water clear red LED 2000 mco 206 v @ 20 ma

100 v DAP 120 a DF01 rectifer

820 ohm resistor

1/16 shrink tube

3/32 shrink tube

Ok...well you know where to get them.

So looking at the parts list should I order  a 1 amp DF01 or should I order a larger one?

I am going to Mauser.  Thank you

I'd get these, more flexible mounting with longer leads, etc.

http://www.mouser.com/ProductD...0z7BctJX9bE5v2nNY%3d

They all have about the same footprint. I woudl order the larger ones with through hole mounting.