If the bell, horn and smoke unit work but the engine sounds don't work would a reset normally clear the problem or does it mean a probable bad sound board
Original Post
Replies sorted oldest to newest
What do you mean by no engine sounds? None at all? Or no increase in sounds as it moves? Try a feature reset and or a DCS Factory Reset.
Is this a PS-2 5V with the 8.4V battery? If so, it could be a bad speaker. G
Turn on engines sounds on the remote, and turn up engine sounds in sounds menu.
If you are running conventional, take to someone who has a DCS remote to do this for you.
Originally Posted by GGG:
What do you mean by no engine sounds? None at all? Or no increase in sounds as it moves? Try a feature reset and or a DCS Factory Reset.
Is this a PS-2 5V with the 8.4V battery? If so, it could be a bad speaker. G
If the bell and whistle work...they all originate from the same speaker. Right?
Is the engine is a Lionel Atlantic 4-4-2 there's a switch under the tender to convert from "signalsounds" to "railsounds"--what you described above sounds like a Lionel signalsounds setting.
