So I'm stumped at what is going on with my upgrade.
I've double checked the wiring and the Chuff-Generator is working fine (I get a signal every quarter turn based on the board LED).
But, I am not getting any chuff signals to the Cruise Commander (sound) or the smoke fan "chuffing". When I run the engine fast, I occasionally get a chuff or a fan chuff in time sometimes with a sound chuff (but only occasionally). My lights are also not working (they are grain of wheat bulbs, not LEDs).
What I did:
Since this is a new install, once everything was in and wired, I programmed the Engine to be Engine 95 and then pressed AUX1 - 4 while still in program mode. I retraced all my wires through the connector between the Engine and Tender. Lastly, I made sure the the Super Chuffer is insulated from the body.
What works:
Idle Sounds, Whistle, Bell, Rear Coupler, Rear Light.
Here is a video I took. You can see the the light on the Chuff-Generator working as I wanted (every quarter turn), but you won't hear any chuff, and if you look at the smoke fan, you will see that it only stops spinning once in a while.
Did I do something wrong or is the board bad?
Thanks in advance.
