Thanks to you guys here on the forum I have got to doing some silhouettes.
Printed off the figures from some kind person here then laminated them another suggestion from here.
To take the top off the coach proved to be a problem but found if you first remove the rubber diaphragm from the far end to the door right at the end you can insert a flat screwdriver and turn & the roof pops off.
Once off using a sharp knife cut off the plastic window.
Now all cleaned up you can cut & fit the silhouettes where they look best using contact adhesive.
Left overnight then pushed on the roof.
The final picture of the ones done this weekend, only the same to do again.
Many thanks to all the guys with their ideas that made this possible.James
Original Post
