I have a LIONEL plastic body ACF Center Flow 3-bay covered hopper.
It needs new Roller Bearing trucks and couplers.
How can the trucks be removed safely?
The screw head is hidden by the way the car is assembled.
There is a sheet of plastic with tabs that is somehow connected to the hopper body.
Where do I start to remove it.
Andrew
Replies sorted oldest to newest
The Lionel Hopper I have from a while back has a small plastic piece on each side of the car above the trucks. Just went down and checked how to get them apart. The two tabs are towards the rear of the truck. Just pull up slowly on the truck on the other side of the tabs and it should pop out.
I will try that.
Access to this requires an OGR Forum Supporting Membership
