Seasons Greetings,
I replaced the pickup wire from the rollers. I have reattached the e-unit, which checked out mechanically and electrically. I have checked and verified power to the motor, including a continuity check of the commutator plate which is same for all three poles.
The yellow wire to the brush plate runs from the e-unit power side and the remaining yellow wire on the drum pick up side is connected to the motor coil connection.
When i connect power the e-unit is working. Either by the direct power by pass or through the e-unit motor hums. I feel the magnetic field energizing but the armature will not spin.
Any one have a suggestion?
Ray
