Skip to main content

Alex, this is really impressive!!!!

 

I have been trying to figure out how get my Lionel 4-6-0 and 2-8-0 engines to give more than 1 chuff/revolution without ripping all the electronics out and installing a fan unit. Problem is, the chuff signal/smoke piston actuator arm is triggered by the right side drive rod (hence 1 chuff/revolution), instead of an axle mounted cam.

 

Has anyone solved this problem?

 

Any help or suggestions will be much appreciated.

Originally Posted by britrailer:

Alex, this is really impressive!!!!

 

I have been trying to figure out how get my Lionel 4-6-0 and 2-8-0 engines to give more than 1 chuff/revolution without ripping all the electronics out and installing a fan unit. Problem is, the chuff signal/smoke piston actuator arm is triggered by the right side drive rod (hence 1 chuff/revolution), instead of an axle mounted cam.

 

Has anyone solved this problem?

 

Any help or suggestions will be much appreciated.

Hi Britrailer,

 

I think the solution for your engine's is, you need a reed switch that will bypass that the trigger arm.This will net you 4 chuffs per revolution. I will post a how to if you need me to do so.

 

Thanks,Alex

Originally Posted by britrailer:

Thanks Alex,

 

The reed switch will take care of sound production but the smoke piston will continue to operate at 1 chuff/revolution - or am I missing something?

 

A "how to" would be very useful.

Hi Britrailer

 

   I'm not sure about the smoke piston, Lets do this. Give me the Lionel 6 digit item numbers and I will look up the parts diagram, to get a better idea. I will post a how to in little later on tonight

 

Alex

Originally Posted by britrailer:

Thanks Alex,

 

The model nos are:

 

4-6-0 6-38042

 

2-8-0 6-28036

Hi Britrailer,

 

 

I took a close look at the parts for both of these engines, I don't see a way to make the smoke units puff 4 times. The only solution is the reed switch for the chuffs, and maybe a fan driven smoke unit upgrade. I know you didn't want to do this, but I think it's the only way.

 

Thanks, Alex

Thanks Alex,

 

I was afraid of that - there is no room for a fan unit without ripping out the Lionel electronics.

 

I was really inspired by your  Hudson  modification, so I've decided to try a JB Weld project of my own.

I plan to add another activator to the left connector rod so the chuff/smoke piston lever fires twice/revolution.

 

Thanks for your help.

Frank

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×