Kadee on K-line Caboose?

Have you turned it up-side-down and found all the screws that hold it together?

Clem K,

  I am also seeking further advice on opening the K-Line bay window caboose.  The windows have fallen inside the caboose and I was thinking it would be a straightforward little project opening the caboose and replacing the windows with a bit of glue this time.  After a few attempts I decided to hold off on this to prevent breaking anything.  I had removed all screws but found the floor still not removable from the caboose shell.  I opted not to force this and break my B&O caboose.

The floor and sides are one piece,remove the roof and that will give access to the screws that hold the trucks to the bottom of the car.

Mikey

There are four screws in the bottom of car. small screws in deep small diameter holes, along each side of car. On one side they are closer together and the other side almost under the trucks. Once they are out you have to unhook the ladders then the roof lifts right off.

Clem 

Agreed with the above and what really helps is a very long electronics screwdriver to get to the bottom. I got mine from snap on and it works great!