Legacy Cab 2 Dilema

Rod StewartOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I inadvertently had two Legacy engines with the same ID on the same track the other night. Using a Cab 1 they would both startup and run etc all in perfect harmony. So I tried resetting one to another ID using the Cab 1, then the other, after which nothing would run even with my Cab 2.

The next day I used the Cab 1 to do an engine reset on both along with a new ID on one. After this they both work fine using Cab 1. But the one engine that was programmed into the Cab 2 will not respond to Cab 2 at all now, even tho it uses the same ID as it always did. Do I have to delete it and reload it into Cab 2? Or what?

Sorry to ask what is likely a simple question, but I am not a big Legacy user.

Thanks, Rod

4/10/184:58 PM

❤️ 0

Original Post

Replies sorted oldest to newest

cjackOGR Forum Member DIGITAL SUBSCRIBER

What does "info" say for the settings of the Legacy engine that does not run? I forget, but there are combos that are problematic.

4/10/185:47 PM

❤️ 0

choochoopaulOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

TMCC Engines do not speak or listen to "Legacy" commands, from the Cab-2.

Legacy engines respond to the TMCC commands, from Cab-1's or Cab-2's.

4/10/188:38 PM

❤️ 0

GVDoblerOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

That's the first I've heard that Legacy cab-2 will not run TMCC engines. Is that correct? I have no Legacy engines and no command system, but I do have a couple TMCC engines.. I thought I should skip directly to Legacy cab-2 and be ready in case I buy Legacy equipped engines.

4/10/188:56 PM

❤️ 0

MartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER

GVDobler posted:
That's the first I've heard that Legacy cab-2 will not run TMCC engines. Is that correct?

That is 100% incorrect. Legacy runs TMCC engines better than TMCC. Something is amiss with what he has going on. The folks above are working it out with him.

4/10/188:58 PM

❤️ 0

cjackOGR Forum Member DIGITAL SUBSCRIBER

GVDobler posted:
That's the first I've heard that Legacy cab-2 will not run TMCC engines. Is that correct? I have no Legacy engines and no command system, but I do have a couple TMCC engines.. I thought I should skip directly to Legacy cab-2 and be ready in case I buy Legacy equipped engines.

Paul didn’t say you couldn’t use a CAB2, he said you couldn’t use Legacy commands. You just have to set the “info” to TMCC

4/10/189:12 PM

❤️ 0

GVDoblerOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Thanks I figured I didn't get it.

4/10/1811:41 PM

❤️ 0

Rod StewartOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Thanks for the comments guys. All interesting, but both engines in this case are Legacy, so it should not matter either way. Back to my original question; do I have to delete the engine from the Cab2 and reload it?

Rod

4/11/1810:38 AM

❤️ 0

Pine Creek RailroadOGR Forum Member

Rod,

I would delete and re-enter the engine, just to make sure everything works correctly.

PCRR/Dave

4/11/1811:09 AM

❤️ 0

CLICK HERE and Subscribe to the OGR YouTube Channel!

Legacy Cab 2 Dilema

Add Reply

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!