Lionel Berkshire Jr. ERR Upgrade

art_legendOGR Forum Member

Good evening everyone. I am in the process of performing a TMCC/Railsounds Upgrade on two Lionel Berkshire Jr.'s, and I was wondering how people typically go about creating a tether between the locomotive and tender during these conversions? Additionally, how do you replace the existing couplers with electro-couplers? (Any additional tips regarding board placement/etc. would be appreciated as well, I have one of the engines in a prototype stage but I have not finalized the arrangement.)

11/24/207:26 PM

❤️ 0

Original Post

Replies sorted oldest to newest

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I used the MTH 10-pin straight tether between the tender and locomotive when I did the set Polar Express upgrade. Mine got the "deluxe" treatment with fan driven smoke, Super-Chuffer, etc. There is a coupler that will bolt on to that truck I believe, but I couldn't find the part number offhand. I didn't bother with the coupler as this was just for pulling the Polar Express cars and I didn't see a lot of switching happening.