Skip to main content

2 replies

Lionel Legacy Boston & Maine 2-6-0 Mogul

M MICHAEL464OGR Forum Member

I know this is a somewhat old subject. I purchased new a Lionel Legacy B&M 2-6-0 Mogul (SKU, 6-84069) which like many others in that release run erratic or choppy, especially noticeable at slow speeds. Even after Lionel sent it on a world tour the issue doesn't seem any better. I even went so far as to obtain an RMA from Lionel but decided not to send it back as I was told they would likely keep it and issue credit toward an online purchase from their corporate web store. Some time has passed and I would like to know if anyone has finally figured out what the problem is. Thanks

Original Post

Replies sorted oldest to newest

W wmcwoodOGR Forum Member DIGITAL SUBSCRIBER

Michael, 

I purchased the same engine. As Norton mentioned, I saw that a bushing was missing on the front drivers. I crudely made a bushing from a piece of black wire sheathing and it seemed to help a little bit. BUT definitely not a cure to the problem(s) they had.  Some of the older TMCC moguls had a bushing, others had a shouldered bolt.  

I was fortunate that mine came back from Lionel working very well. I never did look to see if my bushing was removed / replaced.  

It is unfortunate that these couldn't all get fixed, I haven't taken my off the track since it came back

~Bill

Add Reply

Views: 458
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×