Skip to main content

2 replies

Lionel S-2 Switcher 38484

trains52trains52OGR Forum Member

Working on a Lionel S-2 Legacy Switcher 38484. I had to remove shell to fix front truck. Mounting screw came thru the frame because hole was too big. I put in a screw with a larger head and that fixed that problem. As I was reassembling the engine the 3 wire's broke off of the Audio Board. I have attached a photo. Need to know where on ckt board each wire goes. Any help would be appreciated. Lionel has the complete part but I am good at soldering so I just need to know where each wire goes. Thank You

Attachments

Hide
Images (1)
  • Audio Board with Plug
Original Post

Replies sorted oldest to newest

MH Mellow Hudson MikeOGR Forum Member DIGITAL SUBSCRIBER

52,

It looks like you need to see the back side of this:

But judging from the relatively straight entry, from the right, of the wires in this picture I would say that yellow is in the middle.  You can take a guess on the other two.  S ince this is the potentiometer that controls the audio volume if you get the other two backwards the volume will go down, instead of up, as you rotate the potentiometer clockwise (the normal direction for 'louder').

If that happens just reverse red and black and you'll be all set.

Mike

Attachments

Hide
Images (1)
  • mceclip0
Last edited by Mellow Hudson Mike

Add Reply

Views: 326
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×