I am looking for a male and female molex connector to connect to the end of the 6931 dwarf signal LED wire on the circuit board (J1) to extend the wire. I need to extend twelve of these various lengths. I could just locate the boards under the switches, but would rather have them in a central spot. Any help would be greatly appreciated.
Replies sorted oldest to newest
I am looking for a male and female molex connector to connect to the end of the 6931 dwarf signal LED wire on the circuit board (J1) to extend the wire. I need to extend twelve of these various lengths. I could just locate the boards under the switches, but would rather have them in a central spot. Any help would be greatly appreciated.
Have you tried contacting Atlas directly? They are one of the few companies left that stocks spare parts for the products they sell. They may be out of stock on a particular item sometimes, but at least they are trying, which is a lot more that can be said for most other companies, especially those importing items from China.
Bill in FtL
Mike, that plug you show looks exactly like the Lionel 2.5mm model, they're JST connectors. You can get a matching connector for PC boards as well.
Mike,
Thats a 2.5mm connector you can use P.N 455-1612-ND, 455-1001-ND and 455-1042-1-ND Those are digi-Key part numbers.
Bill
It's poked onto a .1" header block, so I'm pretty sure of the spacing. 
Thank Guys - Mr. Bill's part numbers do the trick!
Access to this requires an OGR Forum Supporting Membership
