Skip to main content

Replies sorted oldest to newest

Very fun to watch and most likely run. How did you couple the Lionel caboose to the 6" tin? I'm guessing it had a combination (Lionel latch and tab/slot)  coupler added to it.

 

Are there any switches on that layout? On our modular club (using Gargraves track/ Ross switches), my metal scissor couplers short out on the switches. Just curious if that's an issue with Realtrax, or if you painted the uncoupler piece on yours.

 

Thanks for sharing that video,

 

J White

 

J White

The Lionel caboose was converted to slot and tab as well as the other Lionel cars that came with a minority coupler. The Realtrax layout you see had switches, which were stored as at one time I ran with all Marx track. I have never had problems with Realtrax switches as I shaved down the frogs to clear the geared wheels. But..that never presented a problem with regular MTH equipment running over the same switches. The biggest issue with scissors and slot and tab is the coupler being loose from either the body rivet or the guide for the coupler body being bent, and then droops enough to short on the 3rd rail. I eliminated the switches to add two more loops.

Bruce

Post
×
×
×
×
Link copied to your clipboard.
×
×