After the car has come around and the carhop appeared, the sound makes a hammering sound. The only way to stop it is to cut the power. Turn the power back on and it completes it's mission. Help!
Original Post
Replies sorted oldest to newest
Probably the limit switch is bad, a wire came off or it is out of adjustment. Just remove the 50 screws from the base to inspect (use a good screwdriver. The heads strip easily).
Thank you,I'm thinking that I will add a off/on button in the hot wire as that is what stops it.
After you get the 50 screws out (Jon’s not kidding) check the rack and pinion alignment for that carhop. The noise you are hearing is the pinion jumping over the rack teeth. Make sure the teeth have not been damaged. This might have been caused by something jamming the carhop or, as Jon said, a defective limit switch not stopping the mechanism.
The noise and vibration are in the area where the speaker is .
Had the same problem. Susan did very helpful in solving the problem. I might see if she can respond
Susan Deats.
Appreciate all help
