Hello everyone,
I've got a slightly quirky issue with my PRR BB-1 (MTH 20-5561-1) couplers. The lead engine's coupler fires just fine, both in conventional and under DCS.
The rear (in this case slave unit I guess) coupler does not.
I checked the coupler, and it works mechanically and electrically (this was done by hooking it up to a different locomotive of on a parallel track and using the firing command from that locomotive on the BB-1's rear coupler.)
After checking the wiring from the harness to the black molex plug for the coupler, everything seems to be in order. No pinched wires or disconnects.
Is there something I'm missing, as I'm presently at a loss.
Original Post
