Just purchased a DCS Explorer as a backup to a malfunctioning TIU. Cannot get the thing to send power to the track. Wires are attacjhed as they should be from track lockon to red/black connections on explorer. Power is applied but nothing happens , no power goes to track, its completely dead. Checked 5 A fuse on unit and it appears OK. Layour wiring is the same as used by the TIU and its OK. Took first Explorer I bought back as defective, the replacement acts exactly the same. Cannot figure out how the unit when setup precisely as described in the owners manual still will not work unless it is basically a poorly contructed product. I use bullet plugs and wires from track to fixed port on TIU and all is good. Use same connection to Explorer and nothing.
Original Post
