I have an MTH GP-40 which I converted to TMC via ERR. By the time I turn my CAB2 controller to the second "click," it runs way too fast. The graph never gets past the 2nd row of pixels. I've tried all options - TMC, CAB1, and R100. No difference. I've set momentum on H, but by the time the graph gets to what looks like the second step, it's back to running fast, making slow movements for switching next to impossible. Any ideas?
Terry
Replies sorted oldest to newest
DC Commander or Cruise Commander?
Cruise commander
Does it run ok conventionally? Is the antenna isolated and not shorting to ground? Have you tried swapping the radio board?
Perfect slow movement control in conventional. Haven't tried the other things.
Terry
Double check all your installation steps, double check all your wires, especially your antenna, and read pages 5,6,& 7 of the instruction manual, and be sure you’ve set up your radio board correctly......
Pat
Access to this requires an OGR Forum Supporting Membership
