Which MTH fan driven smoke unit (model/part#) works well with a ERR TMCC upgrade with the Super Chuffer?
Original Post
Replies sorted oldest to newest
Pretty much any of them will work fine with a Super-Chuffer upgrade. You do have to change the resistors in the MTH smoke units, I replace the two 16 ohm resistors with one 20 ohm 2W wirewound resistor. The replacement resistor goes in the holes nearest the stack and I simply plug the other two holes with solder. The standard MTH smoke units are my go-to choices for many of my upgrades.
Thank you John. Where do you usually purchase them?
@David D posted:Thank you John. Where do you usually purchase them?
@David D posted:Thank you John. Where do you usually purchase them?
Go to mthpartsandsales.com look under parts inventory, type in smoke unit, and shop away, ….
Pat
Here's the two smoke units I use about 90% of the time.
A vast majority of the time it's this one.
For smaller jobs, I use this single resistor model.
For either of these, I use this brass cup to solder my stack extension on.
Attachments
As always, everyone is so helpful. Thank you for sharing you knowledge and expertise. I will make use of it.
