MTH Rail King Bettendorf Trucks

None to my knowledge. At the lowest end, even MTH Rugged Rails cars had die-cast trucks, just without working springs.

Clear close-up photos of the plastic trucks (top, bottom, side) would be helpful in identifying them.

---PCJ

Here are some photos

the photo with 2 trucks is one of the trucks I received from eBay seller and one of the trucks I recently removed from a Lionel train car

thank you for your help

I contacted seller with situation- without admitting nor denying malfeasance- sent an immediate refund / told me to dispose of items I did not want

thanks for your help

I now have multiple plastic Menards and Lionel plastic trucks if anyone can use them

@tsheridan posted:

Here are some photos

the photo with 2 trucks is one of the trucks I received from eBay seller and one of the trucks I recently removed from a Lionel train car

thank you for your help

If the bottom truck in the lower photo (hard to tell from the underside) looks identical to the one with the broken coupler than yes, those are both Lionel's MPC-era (1970's-early 1980's) Symington trucks. FYI, the missing parts on the 'old' truck can be replaced, the knuckle (with integrated spring) and pivot pin are both commonly available from Lionel parts dealers.

---PCJ

Thank you for the info about parts availability but I’m not using Lionel plastic trucks in most cases - I swap them out for metal MTH trucks

I also find buying pre-owned trucks less expensive then ordering replacement parts