Skip to main content

I only have a Christmas Layout so each year when i get things out of storage I like to grease and oil what needs it.  I am confused, and have been, on what to do with car trucks where the wheels and axles are one piece (they move together versus the wheels spinning on the axles). It doesn't seem like a good idea to use light oil, the kind I use on wheels that turn independent of the axle, since the axle is turning in the plastic side frame.

what is recommended in these cases?

As always, thanks.

walt

Last edited by walt rapp
Original Post

Replies sorted oldest to newest

@walt rapp posted:

wheels that turn independent of the axle, since the axle is turning in the plastic side frame.

what is recommended in these cases?

No oil. It will just attract dust & dirt. Let the "needlepoint" bearings do their job.

@walt rapp posted:

...oiling axles with plastic side frames...

Only those that have wheels spinning on the axles, and even then, not on the plastic, only on the axles.

Needle-point axles in trucks or bearings made of Delrin plastic - a very slick "self-lubricating" plastic - should not need any lube. That is one of the reasons that it was used for trucks. Weaver trucks were almost too free-rolling - hard to couple a light Weaver car without it bouncing away.

Delrin is hard to paint - or hard to keep painted - the paint wants to flake off of the Delrin.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×