OK here's a fun one. How do I replace the E-unit on a 027 Wabash F-3?

One screw right behind the motor field(actually forward of the motor) holds the E-Unit to the frame.  It is a little hidden with the motor in place.

Thanks Rob, I pulled the motor and just found it. How embarrassingly easy. Don

If all else fails, hammer.......

Gandy

Don:

I assume you are talking about the #2240 single-motor F3 from 1956.  I don’t have that one but I have a chassis from the similar #2243 Santa Fe. 

Attached are 2 close-up photos: the first one shows the e-unit sitting on its side to the right of the slot in that vertical appendage to the frame.  The second photo shows the e-unit mounted vertically with the screw going into that slot horizontally.  Hopefully you can see the slot and the screw.

HTH,

Bill

Thanks Bill, I found out how to do it by wiggling it after I pulled the motor. You guys are what make the forum the best. Don

Don, why are you replacing the E unit? Is it damaged? Usually these can be rebuilt economically, to function like new. Just curious. 

Units fine. Frame has major damage from battery. I found new/old frame on E-bay with good battery bracket so I'm taking everything off the old frame. Thanks for asking though. Don