Skip to main content

This is the last of the three locomotives I picked up at the NYE 2021 Cabin Fever MTH warehouse auction. I won a Premier CNW E4 Hudson https://ogrforum.com/...rthwestern-e4-hudson, a Premier SP GS4 locomotive/tender shells https://ogrforum.com/...c/169374064469124643 and this ATSF 5011 class Texas. The Texas was unpainted, missing some detail parts (some were in the box), had no motor or driveline, and no wiring harness. Here's how it looked out of the box.

download [2)

My parts bins yielded the missing detail parts (including the smokebox front), a worm shaft, drive shaft dog bone, motor mount, 50mm flywheel, and a 12V 9234 Pittman with rare earth magnets and 6mm ball bearings. Once the chassis was assembled first order of business was adding missing detail parts and guides so I could add bell and whistle pull cords.

20220930_163901

Next I painted and decaled the locomotive over the summer. I used SEM automotive paints, trim black and 1K matt clear. Decals are Microscale. I used road number 5012, because the lighted number boards had that number and I was too lazy to change it.

20220920_15264320220924_14255720220924_14263320220925_19134920220925_19142520220925_19153920220930_16452320221001_16465220221009_10582720221009_10590320221009_11030520221009_110406

This locomotive got a standard PS3 steam upgrade kit. I built a harness in the locomotive for all LED lights and wired them to the headlight circuit. Tender got a LED reverse light and twin 50mm Visaton speakers.

20221228_17115220221228_212257

Finished locomotive. If you've ever wanted a locomotive "kit" you could assemble here's what you're in for.

20221228_22285720221228_222948

Attachments

Images (18)
  • download (2)
  • 20220930_163901
  • 20220920_152643
  • 20220924_142557
  • 20220924_142633
  • 20220925_191349
  • 20220925_191425
  • 20220925_191539
  • 20220930_164523
  • 20221001_164652
  • 20221009_105827
  • 20221009_105903
  • 20221009_110305
  • 20221009_110406
  • 20221228_171152
  • 20221228_212257
  • 20221228_222857
  • 20221228_222948
Last edited by Lou1985
Original Post

Replies sorted oldest to newest

@Randy_B posted:

Is that pretty good quality paint? I ask because it looks absolutely factory from the photos there and looks like it could have come that way. Neat project and fantastic result!

Yup. The SEM paint is very good quality. More expensive than model paint but it's much more durable and gives a better finish, since it's automotive paint. One word of warning: it's high VOC and has strong vapors. Only spray it outside or in a automotive spray booth. Your airbrush booth won't cut it.

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
CONTACT US
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×