Skip to main content

I bought a new MTH Switcher Engine at York in April. Had problems with it just sitting idling. Took it to a local train shop. They found that the battery was dead. They replaced it with a new battery. It worked fine at the shop. I brought it home and I'm having problems with getting it to move again!!! All it wants to do is sit an idle!!! I read on this forum that it needed to be charged for 8 hrs. I ran it around this small circular track all day Sunday for 9 hrs!! Thinking this would take care of the problem; but it didn't!!! It still sits and idles!!! I'm running it with a older Lionel CAB-1 TMCC off a 110 watt transformer. TT
Original Post

Replies sorted oldest to newest

It's a SW 8-9. It ha Proto Sounds 2. The transformer is a Lionel RW 110 watt. I tried what SJC suggested about it "locking" up this evening. I checked the manual to see how to "unlock" it. I followed the instructions to the letter. It ran fine for about 5-6 times I shut it down and restarted it. I shut it down and went back about a half hour later and tried it and it's back to doing the same thing of just sitting there idling. I pushed the direction button several times; still with no movement of it.
Think I found my problem. It's a power problem!!! I took the loco off this smaller track I had powered with the 110 watt transformer. Put it on another track I have powered with a 180 watt power brick. When it was on the 180, it took off every time!!! I had a extra 180 power brick so I hooked it up in place of the 110 watt transformer. Has worked every time I've fired it up!! Thanks for your help guys!! TT
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×