I'm still a little confused about the R100 setting. Is it just for ERR equipped engines? I have K-Line cruise engines, and Atlas cruise control engines that respond terribly to speed settings (sometimes my K-line F3 will accelerate when I turn the red knob to decelerate). They never respond to the speed control arrow buttons, but I don't even know if they are supposed to. Hopefully someone can help me out with the settings for these engines. Thanks.
Replies sorted oldest to newest
It was designed for ERR locomotives. I don't know if it works for any other locomotives with more than the TMCC standard 32 steps. ERR has a 100 step mode you can program from the remote, that's when you use the R100 setting.
How do you get the K-Line cruise into the 128 step mode?
Which soft keys?
And if you don't have the manual, I guess the soft keys don't exist? 
John the key strokes for K-Line Cruise speed steps are:
32 Steps: Dir, Bell, Aux1, 1
128 Steps: Dir, Bell, Aux1, 2
256 Steps: Dir, Bell, Aux1, 3
Thanks Steve, I'll give the R100 a try on my K-Line with the cruise. 
Are those keys issued when you're in Run mode or Program mode?
Thanks.
Anyone have a problem with using "electric" as an engine type in R100 more. When I use "electric" R100 shows as (not supported). I just swiched it to diesel and it's fine. It really doesn't matter but I found it odd.
Access to this requires an OGR Forum Supporting Membership
