Skip to main content

Hi,

I changed the tires on this steamer and had to loosen the center crank bolt because the tire wouldn't slip under the rod attached to the tire wheel.  I thought I put it back the same way but the bolt loosened and the rods jammed going around the track.

I have been messing with it but I don't seem to be able to get it right.

1.  Are there detents in the center crank assembly so that it is clear how it aligns?  I don't feel any.

2.  Here are photos of the left and right sides as I have it assembled now.  It binds at low speed.

MTH 4-6-4 RODS LEFT SIDEMTH 4-6-4 RODS RIGHT SIDE

I have one photo of the left side only from when I bought it.

20211111_095822

Thanks for the help.

John

Attachments

Images (3)
  • MTH 4-6-4 RODS LEFT SIDE
  • MTH 4-6-4 RODS RIGHT SIDE
  • 20211111_095822
Last edited by Craftech
Original Post

Replies sorted oldest to newest

Add Reply

Post
This forum is sponsored by MTH Electric Trains
×
×
×
×
Link copied to your clipboard.
×
×