We hoked up the tiu to-day and the variable track is not working.when we turn up the voltage the enuge moves and the horn does not work nor the bell also. It is set up wright and it is programmed in the romote wrigt too. Can you tell me is going on,thank you. PS. We are using a cw80 and fast track.
Replies sorted oldest to newest
Probably the CW-80 not compatible. Try a different transformer. G
It is set up wright and it is programmed in the romote wrigt too.
Hopefully, you took more care in setting up the TIU that you did editing your post.
First, I agree with George. Replace the CW80. It has a history of not playing nice with DCS or PS2/PS3 engines.
Second, not to put to fine a point on things, however, exactly how did you set up and program the TIU? Please be specific.
It is set up wright and it is programmed in the romote wrigt too.
Hopefully, you took more care in setting up the TIU that you did editing your post.
First, I agree with George. Replace the CW80. It has a history of not playing nice with DCS or PS2/PS3 engines.
Second, not to put to fine a point on things, however, exactly how did you set up and program the TIU? Please be specific.
Yes it is set up wrigt and is programed in the romote also.I will try another transformer and let know if it works. PS. I watched erics review of the dcs wiring of the tiu variable input,and read the manul. Thanks!
I watched erics review of the dcs wiring of the tiu variable input,and read the manul.
That's nice. I still have no idea what you actually did.
One more time, exactly how did you set up and program the TIU? Please be specific.
I watched erics review of the dcs wiring of the tiu variable input,and read the manul.
That's nice. I still have no idea what you actually did.
One more time, exactly how did you set up and program the TIU? Please be specific.
I ran two wires form the track to the tiu output the the cw80 to the inport,in the romte I whet too TR and went to varblale 1 whare the wires are at. Ps the tiu has not bin altered it is new.
You need to provide power to either Fixed #1 In or the Aux. Power port in order to run DCS engines on any of the other 3 channels.
Connect two jumpers, one from Variable #1 In Red terminal to the Fixed #1 In Red terminal, and the other from the Variable #1 In Black terminal to the Fixed #1 In Black terminal.
That should read "too" fine a point. 
You need to provide power to either Fixed #1 In or the Aux. Power port in order to run DCS engines on any of the other 3 channels.
Connect two jumpers, one from Variable #1 In Red terminal to the Fixed #1 In Red terminal, and the other from the Variable #1 In Black terminal to the Fixed #1 In Black terminal.
We did the we have the brick on the fixed in one and out for the dcs engines we have, the problom was the cw80 so we tryed to dasiey chain the brick to the varblale track and now it works! Thanks guys!!!
Poster # two is a winner!
Glad you got it. G
That should read "too" fine a point
No, I'm afraid that you're mistaken. It's correct as written.
The use of the word "put", in this case is "to put", as in "to place" something.
In other words, "I decided to put the cup on the table" or "I decided to put a sharper point on the pencil".
Access to this requires an OGR Forum Supporting Membership
